Pool stabilizer

Pool Stabilizer | Everything You Should Know About Stabilizer

A pool stabilizer is cyanuric acid, and it protects the chlorine from UV rays of the sun. The sun can destroy your sanitizer. So, you can use a pool stabilizer to protect your chlorine. These pool stabilizers will help clean water, and your pool will be safe for family and friends. You need to add a pool stabilizer to counter the sun’s effects, and it keeps your chlorine levels stable. A good pool stabilizer is essential for every pool.

What Is The Pool Stabilizer?

Pool stabilizer protects your chlorine from  UV rays. Without a buffer or protection, the sun can consume up to 90% of your unstabilized chlorine within a couple of hours. Pool stabilizer also called a pool conditioner or chlorine stabilizer. Cyanuric acid acts as a buffer, and it protects your chlorine from those hungry UV rays.

Pool stabilizer and enjoy people

You can get this acid in liquid or granule form. And it can be mixed with chlorine tablets or sticks, also in chlorine shock. Usually, you have to add a stabilizer once at the beginning of each swim season. Most chlorine products contain cyanuric acid. If you buy a chlorine product that contains CYA, so your swimming pool should be getting a steady dose.

What Is A Pool Stabilizer made of?

A pool stabilizer is mainly made of cyanuric acid. You can find this acid in liquid, dichlor granules, or included in chlorine trichlor tablets. It is recommended to add a stabilizer in every swimming season and also when you are replacing the pool water. Sometimes, most chlorine products shall come incorporated with doses of cyanuric acid. And these acids are used to keep chlorine in your pool safe over each swimming season.

What Does The Pool Stabilizer Do?

The primary purpose or work of the pool stabilizer is to help your chlorine stay in the water longer. These pool stabilizers bind to chlorine ions and make them impervious to the sun’s rays. Without the pool stabilizer, ultraviolet rays of the sun would break apart the chlorite ions. It also allows the chlorine to evaporate into the air. Because it stabilizes the ions, free chlorine will be available for sanitizing three or five times longer than without a stabilizer.  But the stabilizer’s longer lifespan comes with a bit of catch. The stabilizer creates a bond with chlorine, its sanitizing ability, which goes by the fancy name oxidation-reduction potential.

On the other hand, it can take stabilized chlorine longer to kill bacteria than, and it takes chlorine without stabilizer. There is good news for you. As long as you maintain certain free chlorine levels, the stabilizer is incredibly helpful in enhancing the life of your chlorine. It also helps to maintain proper pool chemistry and will save you money.

How To Add Stabilizers To The Pool?

You can add a stabilizer poured straight into the pool water. Most pool chemical instructions tell you to add them to the filter. Moreover, when it comes to pool stabilizer, you don’t want to do either of those, even if the instructions say it’s all right. You have to remember that the pool stabilizer is an acid. So, the chemical dissolves very slowly, and that acidic effect can damage your pool surfaces or skimmer.

If the acid is left to sit there and disappear on its own, it will damage your pool surfaces. There is a suggestion, buy a five-gallon bucket, fill it with water, and then dissolve the stabilizer in that water. These tricks will take ten minutes or an hour to dissolve. And it won’t damage expensive pool surfaces.  It also delicate circulation parts by leaving an undiluted acid lying around on them.

How To Increase Stabilizer In pool/ How To Raise Stabilizer In Pool Water?

If you need to add a stabilizer for raising a stabilizer in your pool water, you must first determine how much stabilizer you need to add. Typically, about 13 ounces of granular stabilizer will increase the cyanuric acid level of 10000 gallons of water by ten parts per million.

While the pump is running you can add the stabilizer to the skimmer basket. Cleaning or backwashing the filter is not allowed for a week after adding the stabilizer. Now, you know stabilizers dissolve in the pool very slowly. You won’t be able to get a proper test reading to show how much you have raised the cyanuric acid level for several days. You should wait a week before testing the level again. And you can add more stabilizer if necessary.

How To Lower The Stabilizer In The Pool?

You need a lower stabilizer in the pool if your CYA levels are too high. It is indispensable to keep the stabilizer balanced. There is a chemical available, which is called a cyanuric acid reducer. However, there are still several questions about whether it works or not. You would instead try this before you dilute your pool. The most reliable or easy way to reduce CYA levels is dilution. And according to these tricks, you need to drain a portion of your pool water and add fresh water.  By using this method, you can keep the stabilizer level balanced.

You may be interested to read Above Ground Pool Skimmer | Don’t Work Skimmer Properly?

How To Dissolve Pool Stabilizer?

Warm water dissolves cyanuric acid quickly, and stabilizer granules are too slow to dissolve in pool water. Certain manufacturers suggest dissolving cyanuric acid in warm water before adding it to the pool. Others suggest broadcasting the granules over the pool by adding the product near a jet or return line.

Some suppliers recommended adding granules via the skimmer so that they can dissolve in the filter. This method will release a stabilizer to the pool over several days. You should avoid backwashing or cleaning the pool for three days after adding the stabilizer. This process needs much time for the product to dissolve and circulate properly.

If you have added the stabilizer directly to the pool, you probably left with several undissolved granules. And these granules will sink to the bottom of the swimming pool, where they may take several days to dissolve properly. Remember that the presence of these granules does not indicate that you have added too much stabilizer. This product is so slow to disintegrate. You can make faster the dissolving process by agitating the granules with a brush to circulate in the pool water. Repeat the operation several times before all the granules dissolve. And you can use the swimming pool at this time.

How Much Pool Stabilizer To Add To The Pool?

You will find many variations among the suggestions for the optimal level stabilizer in your pool. You can add stabilizer for a few parts per million (ppm) to 100 ppm, and everything in between. There is a suggestion, nothing higher than 50 ppm.

The necessity of stabilizer depends on the difference in chlorine effectiveness between pools with stabilizers. The stabilizer has some adverse effects on free chlorine. Stabilizer levels above 50 ppm may cause algae growth. You should have known that the stabilizer level above 50 ppm does not provide any significant increase in UV protection for chlorine.

But there is a risk of increasing bacteria and algae growth. If you use a pool stabilizer at 50 ppm or lower, you have to monitor your available chlorine through regular. And frequently test the water to ensure your pool is properly sanitized. For maintaining a healthy balance, keep your sanitizer levels at 7.5% of your stabilizer level. 50 ppm pool stabilizer is the ideal level in any case.

Frequently Asked Questions | Pool Stabilizer

How often should you put a stabilizer in a pool?

Once you put a stabilizer in your pool, it stays at pretty much the same level unless you have to do a water change or have a big splash out or a lot of evaporation. Cyanuric acid doesn’t get used up like other chemicals. It is a good thing for cyanuric acid. And sometimes it could be a bad thing.  Any dilution can cause lower CYA concentration.

Dilution could come through adding water, even from the rain. It is necessary to add a significant amount of CYA  when you open your pool for the summer. If you use stabilized chlorine each week, then you have to add a little CYA every time. Because of reducing the water addition or loss, you have to add CYA throughout the year.

What happens if the stabilizer is too low in the pool?

Usually, you don’t need to add cyanuric acid to your pool after the initial dose for the first time. But sometimes it is essential for pool water. After many events, it’s a great idea to test your CYA levels. If your pool water level has been lowered for some reason, you have to add the right amount of CYA.

Whenever you are determined that the levels are too low, go ahead and calculate the amount you need for your pool water. After calculating the pool water CYA level, add 30 ppm of cyanuric acid to the water. You can dissolve it in your bucket and pour it around the edge of your pool. Now, retest again in about 24 hours. You can repeat it if necessary.

How much stabilizer to add to the saltwater pool?

The amount of stabilizer for a saltwater pool depends on the pool’s level. The general level lies between 30 ppm to 50 ppm. And there is also a suitable figure that is 35 ppm to 45 ppm. It honestly depends on the pool’s level. Some professionals may argue that the CYA level could be up to 75 ppm.

We wouldn’t suggest that because 90% of the time, it would result in chlorine lock. Chlorine lock is the situation in which your pool tests negative for chlorine. But you have added plenty of it. The ultimate recommendation is to do regular water tests to ensure that the level remains below 50 ppm.

Final Thought

Here you have all the procedures of adding a pool stabilizer to your pool. We hope that these methods will help you to add pool stabilizer correctly.  Because a stabilizer is an easy one-time solution to chlorine loss, pool stabilizer will reduce the bacteria and algae so that your family can enjoy a great pool. Remember to keep things balanced, because you might be skinny-dipping in a pool with 90% chlorine level.

Leave a Comment

Your email address will not be published. Required fields are marked *